Sam's Proper MX-3 - LT Turbo project *Parting out*
-
Yeah Im doubting now looking at it again. The rims are 15 x 8 ET15, going
for a bit of stretch with the 195/50 tyres.Have you hired an arch roller or you going ghetto?
-
Mr Baseball Bat came out to play lol… it's quite neat if you take your time.
hmmm optimistic on that one... rolled and flared?! Maybe mad camber and the stretch will do it but I'm not sure.
-
lol thought he might, heatgun too?
Im really tempted to DIY as Archenemy is £130 to roll all four.
Think Im going to have to get a scrap tyre of one of the new rims to see where it's at..
-
haha nope cold and crackly. I'm derusting my arches as they're bubbly. If my arches were pristine I probably would have paid or hired a roller tool. I had little to lose, I knew I'd be rust treating anyway so I just went for it :lol:
Yes I thoroughly recommend setting up a test tyre to try. I first got 2x part worn 205/55/16 then found out there was noway they were sitting under the front happily.
-
Ah I see fair one!
Think thats a plan man, will go grab a scrap tyre friday :)
-
Just bought a set of these lug nuts off ebay (where else!)
£24 for a set of 16 inclding key. Went for steel over aluminium as these are
cheaper once you take in to account customs charges for the US ones in lime green
tuner style alu lugs, and im really not keen on using alu lugs on steel threads if I wanted to give it some beans on a track one day!
-
i snapped one of my allis it corroded to the steal thread :-( cost me about 70 to get it removed
-
shit! bad times :cry: I guess your not even supposed to use a copper/moly grease to keeping them from doing that either.
-
The green ones I bought are steel.
-
Went to Hillsea Tyres to get a part worn 195/50/15 put on for £25, struck up a deal to get all my four tyres changed over to the new wheels and balanced for £30!
New wheel nuts turned up this morning too :D
Heres the pics…
Top of the tyre tread is very flush with the arch, so only a arch roll should be needed…
-
yes looking gooooood!
-
Another 30mm off the ride height and it'll be even better :D
-
hellaflush ftw :D
-
noice :D :D
-
Best book up Archenemy for the end of the month then 8)
EDIT > Now booked for Saturday 27th August.
-
you must be absolutely itchin to get this turbo in. I'm pretty excited bout it myself. I so want to do this to mine but it'll be a while before i've that kind of money to throw at it. You any closer to get it all in?
-
Yes and no, tbh I know Ive got to be patient as it isnt all going to happen this year, and Im not too power hungry as Im still enjoying having 16 valves as opposed to the old 8 valve pug.
I hope what will get done this year is the ECU and the clutch put in. We have most of the wiring diagrams needed for the install I have lots of loom wire which I had leftover from last time, I still need to buy a blank ECU plug (found the part no.) so we can make the loom up. The clucth I will buy in the coming months, possibly fitted at a garage as I dont have one myself. So when Autumn/winter comes I wont
be wanting to fit up anything major. I will probably look at how an intercooler will fit. So over the winter I will collect all the other parts needed ready for spring 2012.
-
Had all the tyres changed over and the new wheels put on. Roll of the arches tommorow and drop if I can be bothered too on a bank holiday ;)
Its funny now the tyres have been stretched there is a one finger arch/tyre gap, before it was 2! Another 15mm drop would see no gap at all.
-
Looks amazing Bud…. Well jealous!!! :wink:
-
:D Thanks Hammy …... :oops:
