Sam's Proper MX-3 - LT Turbo project *Parting out*
-
i snapped one of my allis it corroded to the steal thread :-( cost me about 70 to get it removed
-
shit! bad times :cry: I guess your not even supposed to use a copper/moly grease to keeping them from doing that either.
-
The green ones I bought are steel.
-
Went to Hillsea Tyres to get a part worn 195/50/15 put on for £25, struck up a deal to get all my four tyres changed over to the new wheels and balanced for £30!
New wheel nuts turned up this morning too :D
Heres the pics…
Top of the tyre tread is very flush with the arch, so only a arch roll should be needed…
-
yes looking gooooood!
-
Another 30mm off the ride height and it'll be even better :D
-
hellaflush ftw :D
-
noice :D :D
-
Best book up Archenemy for the end of the month then 8)
EDIT > Now booked for Saturday 27th August.
-
you must be absolutely itchin to get this turbo in. I'm pretty excited bout it myself. I so want to do this to mine but it'll be a while before i've that kind of money to throw at it. You any closer to get it all in?
-
Yes and no, tbh I know Ive got to be patient as it isnt all going to happen this year, and Im not too power hungry as Im still enjoying having 16 valves as opposed to the old 8 valve pug.
I hope what will get done this year is the ECU and the clutch put in. We have most of the wiring diagrams needed for the install I have lots of loom wire which I had leftover from last time, I still need to buy a blank ECU plug (found the part no.) so we can make the loom up. The clucth I will buy in the coming months, possibly fitted at a garage as I dont have one myself. So when Autumn/winter comes I wont
be wanting to fit up anything major. I will probably look at how an intercooler will fit. So over the winter I will collect all the other parts needed ready for spring 2012.
-
Had all the tyres changed over and the new wheels put on. Roll of the arches tommorow and drop if I can be bothered too on a bank holiday ;)
Its funny now the tyres have been stretched there is a one finger arch/tyre gap, before it was 2! Another 15mm drop would see no gap at all.
-
Looks amazing Bud…. Well jealous!!! :wink:
-
:D Thanks Hammy …... :oops:
-
Looking bang tidy :lol:
-
Those wheels look fangtastic, cant wait to see them hiding in the arches
-
Looking good Sam!! :D
-
Cheers Paul :D
Dan from Archenemy has been and gone! Top bloke!
He said it was one of the most easiest cars to arch roll and really was stunned at how good a condition the arches and paintwork were in!
The front tabs that hold the inner guard on were left in place (usually ground off) and folded up no problem. The front arches also flared themselfs somewhat of its on accord when rolling, wich was done in two or three passes of the roller. No paint cracked , but you could just see were it was going to start, so thats when he stopped. Then tiger seal applied even though no bare metal was exposed.
Well worth the £110 it cost for all four arches, as Ive got loads of clearence now and looks well factory modified :D
-
that looks stunning :shock:
-
30mm more off the back! Only 15mm off the front though as we didnt
have the spring compressors!
