6 speed gear box
-
is there any 6 speed gear box that mazda produces and would it fit in to an mx-3 as i noticed i'm always looking for another gear and would like to release more out of the car.
-
not that I know of, but the mx-6 transmission does have a different ratio on its 5-th gear.
-
now we are talking think im going to have to sus that out if i dont sell here thanks
-
Dewsbury Auto Salvage Ltd will sell you a reconditioned MX-6 gearbox for £211.50 delivered. Their number is 01924 437743.
-
anyone know the ratio for the 5th gear?
-
Not off hand, but I do know that it is taller.
-
bout the mx-6 gearbox will that fit in the mx-3 with 1.8 engine?
-
If a standard gearbox bolts up to a ZE then a mx-6 gearbox should bolt up to an mx-3.
But dont really see the point in doing it unless your current gearbox is knackered.
All the gears are the same except 5th and thats taller I think which means slower accelleration and a slightly higher top speed, so whats the point?
-
Surely for 5th gear top speed is a bit more important than acceleration though. It is for me anyway. All preference at the end of the day tho.
-
yea! u have a 3rd gear thats for ur acceleration! eveetything else is just for getting to max speed! anyway! if you have a jap car etc. your have a limiter on your car! so ur not gonna get past 118mph
-
It might save a bit more fuel though.
-
It's deffinitly worth the effort, got it for years now and it gives you abit higher topspeed with a klze and will save you money on gas. My klze with mx-6 trans is more fueleconomic than my k8 was with the original trans.
Bastian
-
hummm not going to get past 118mpg,,, if your on about my mx-3 1.8 something wrong there. easy top 130. but enging wants to pull more but need higher gear.
so would the mx-6 work with the 1.8 as i dont think i will carry out the engine swap now. to much hassel at the mo!!!!!!!
-
when were they restricted??
havnt even driven my car yet!!!
so dont know if its is or nt lol
-
thats what i was thinking, as there is no way mine is restricted by ecu. only reason is restricted is as 1.8 not the 2.5.
-
Jap cars are limited to 118MPH
mine is…
in 5th a 4.2k revs im on the limiter.
and cant pass out the god dam glanza infront of me cos when i go to overtake i hit 118mph and drop down to 116
-
cut the wire on the ecu, its pin number 11. Once the ecu gets no pulse from this cable, you get your top speed… I top out at 245kmph.
If you search on the net, you will find step by step.
-
Could it be that jap imports have a limiter but uk spec don't?
the majority of people on this website have the k8 engine as far as I'm aware whereas irish has a 1.5 import. could this be the difference?
-
The difference is in the ECU, all european ecus have no limiter where as all ecus out Japan come pre-prgramed to engage the fuel cut at 180kmph
-
uk spec ones arn't limited, i agree with the fuel thing, at 80ish your at 3500RPMish although mine hits the red line at 140, so i dont think top end speed is a problem :?