OBDI or OBDII?
-
Is my car OBDI or OBDII its a 1995 mazda mx3 DOHC im about to do a BP swap and idk what year protege to buy for my swap thank you
-
Best way is to check the first part of this guide and take a look bud
-
Sadly that doesnt work for me, I have a 4 port ECU but only 3 Connectors, ideas?
-
That is odd.. I'd run with number of connectors.
You got pics?
-
it looks like this, will get the numbers of mine later, but this is how it looks, with the same connector missing, its not fallen out, its not there at all, but the ecu has a place for it
-
hmm alas my knowledge of OBDII ends with what I've read. Both mine are OBDI despite being late 95. It looks like you have the same harness as an OBDI car. IIRC I've read that the ukmx3s didn't get the proper OBDII treatment and may not have the diagnostics.
I think admin on here has experience with them.
-
im stumped also, im sure my obd1 ecu doesnt have a spare connector??. Is it perhaps obd2 and spare connector is for an automatic tranny harness??
-
mines manufactured in 98, so must be obd2, perhaps a revision at the last moment? is admin still awol? sucks cos hes only 20miles from me!
-
I been doing research and i may have obdi however i only have 2 conectors not 3 or 4 mine is a 4cyl any ideas? Its like this however mine r yellow
http://item.mobileweb.ebay.com/viewitem?itemId=360376066230&index=6&nav=SEARCH&nid=48118394607
-
cant find a single reference to my k862 ecu, have found one for sale, but not a scrap of reference otherwise on any website or forum anywhere, theres a small reference to the k861 on a lithuanian website and a netherlands website, but thats as far as it goes, ie, just a reference
-
Maybe obd 2 has more sensors around the engine but is based on obd1 it could be that the ecu will work on obd1 as that was still in its infancy in the mid 90's. The cost of upgrading the software at dealers back then would be astronomical so you may find early obd2 was still easy to use on the old format bit like wkndows 98 and xp
-
im not sure I understand what you mean dj
-
It may be based on the same ecu but has more connectors but still compatible with thd old system
-
so whats that mean then OBD 1 or 2?
-
still trying to find an answer if anyone knows?
-
Open your ecu, if it is filled with processor chips: obd2, if you find a bunch of ic's in there, its obd1..
-
id rather not to be honest
-
Err its a cover with four screws.. nothing attached..
-
but it means pulling apart stuff as theres no easy way I could see that I could get to the bolts that hold the cage ontop of it off
-
@7037816d92=Jesta:
but it means pulling apart stuff as theres no easy way I could see that I could get to the bolts that hold the cage ontop of it off
Ehhm no its just a metal plate on top.. Four screws and you can lok at the internals..
See a whole bunch of these:
http://2.imimg.com/data2/EB/VX/MY-741063/electronic-ic-250x250.jpg
OBD1Looking like these:
http://img230.imageshack.us/img230/8789/66507he9.jpg
OBD2
