Big brake kits?
-
Things went well.
I have a number of schemes on the drawing board ranging from 275 up to 320mm brakes, using a variety of Mazda and aftermarket parts.
Four-stud options go from an easy 275mm off-the-shelf nut-and-bolt single-pot how-to option to a possible 294mm disc for the Xedos 9 Twin-pot which requires some machining of the MX-3 knuckle and a sturdy bolt-on bracket.
Five stud options are 296 and 320mm with big alloy calipers. :shock:
It's all looking a bit tight on clearance for the five-stud, I'll have to be fairly lucky with (big - 16x8) wheel choice - but when I have parts, I'll let you know. :D
-
Good to hear more options coming through. I'm very happy with xedos 9 callipers but would love a bigger disc to match.
-
Surely if there is a list of rims from other cars as long as your arm which wheels fit then also the brake discs will fit? Its only a case of measuring up the discs to find discs that will fit and calipers with the same bolt pattern
-
i really wish willwood or k-sport made brakes for 15" rims :(
-
Just spend the money on decent pads like Mintex 1144's then your not increasing weight in the wrong area ;)
-
My kit is lighter than oem.
-
What is your opinion on the redrilling of a 5 lug disk to our 4x100 lug pattern ?
I'm trying to find 4x100 disks but so far only Mini cooper (S)
-
Dont see any issue with that as long as you use a pillar drill and the old disc as a template or take it to machine shop and have them do it?
Centre bore may require a spigot locating ring?
-
at that point, you might as well just do the 5 lug swap. then you could even do the mazda6 break upgrade. the 03-05 mazda6 set up clears 15's, and bolts on to the 5 lug hubs.
-
http://www.xyz-auto.co.uk/products/Front-6-Pot-355mm-Brake-Kit-%3A-MAZDA-MX%2d3-%3A-94%2d98.html
http://www.xyz-auto.co.uk/products/Rear-4-Pot-330mm-Brake-Kit-%3A-MAZDA-MX%2d3-%3A-94%2d98.html
-
I thought I'd revive this thread.....
I'm presently swapping out the 4 stud hubs for 5 stud and I'm going to have a play with getting some audi s3 320mm discs and rx8 calipers to fit the front of the mx3. I'll post some pics up here when I get the calipers.
