6 speed box for mx3
-
Good find Marc, very interesting read about gearboxes. Wonder if the thing will hold together once he's welded the Mazda bell housing to the GM box.
One thing I did notice though, probably just me being picky :oops: he kept calling the Mazda box the MTX75 :? Now I know that our G series and the Ford MTX75 are essentially the same, same inards and what not, but I thought the bell housings were different? Or is he trying to confuse us! :lol:
I've often wondered if the MTX75 and our G series were the same. It'll open up loads of options to us MX owners if the bellhousing match.
I've often thought about using the MTX75 4x4 box from and Escort RS 2000 or Mondeo and converting an MX-3 to all wheel drive, I wonder if it could be done. Other option could be to take the transfer box off the MTX75 along with its guts, and stick it all in a G series case and try to get the transferbox to mate up??? Just thinking out loud now :D
Other option if they match would be to use the new Ford 6 speed boxes, say from the Focus ST170. Could be an option for a 6 speed MX-3!
-
After a quick read it seems that despite the same naming they are generally not interchangeable :( FWD escort gears seem to be compatible though.
The way that's been done 2/3 times for AWD mx-3 is to take everything from 323 GTRs. My objection to that is they share the same glass gearbox!
-
@00bca3ca48=Mikey:
Other option if they match would be to use the new Ford 6 speed boxes, say from the Focus ST170. Could be an option for a 6 speed MX-3!
If the above mentioned gearbox fits an MX3 then you could also use a sierra rwd box prop and final drive as this bolts up to later ford tec's engine.
-
The MX-6 box has a taller 5th gear, but thats about it.
The only downside to the mx-3 (especially my ZE) is the MPG.
-
haha yea I'm on about 28mpg on my ZE. Though all my journeys are <12miles and the probinator chip I run is far too rich. Thinking about it though it's ok for a 2.5 engine. Think of the rx8s :lol:
-
@db6ae2bc00=Mechanic:
If the above mentioned gearbox fits an MX3 then you could also use a sierra rwd box prop and final drive as this bolts up to later ford tec's engine.
From what I can remember is the bell housing is removable on these boxes too, so it should be easier to get something fabbed up to fit…. again it's all about how much your wallet will let you do :lol:
From what I've been reading the ST170 box won't fit, its called a Getrag MT285, it has the same bolt pattern as the MTX75 fitted to all the later zetec engines. Makes it a direct swap for Fords, but that's no good to us! :x
However, the new gearboxes found on the new duratec engines (not sure of the name) have a Mazda bolt pattern :D makes sense as the duratec is basicly a Mazda engine! Dunno if it's the same bolt pattern as ours but could be worth looking into. Hard to find any info on them at the mo, but apparently the one to be looking for is the 6 speed of the diesels.
-
my probinator chip runs way too rich too.
Some of the KIA gearboxes do fit the MX3, but only the 1.6 as far as I know.
-
@471c768c16=ukmx3admin:
The MX-6 box has a taller 5th gear, but thats about it.
The only downside to the mx-3 (especially my ZE) is the MPG.
Yeah i know that feeling i average 21mpg. :(
-
Haha maybe mines not so bad then I'm getting 27mpg+
-
I'm about 21 mpg also, but you can smell its running rich.
Need to go megasquirt and get it mapped really.
-
ha ha my 1.8 v6 has just had the cat back on, and for some reason it feels a hell of alot quicker, plus i filled up and i got 100 miles to a quarter of a tank… now thats fu***ng awesome, its like a turbo diesel lol
