DILLIGAF?: Project Ratty
-
So I went up to the Mazda garage today and they came up completely blank with the V6 splitter, so I popped round the corner (literally) and picked up the alternative:
Leon Cupra R splitter (£23 from Seat!- Bargain, especially when idiots on Ebay try flogging them for £26+ p+p!)These also arrived the other day:
MX3 Harness pads all the way from the US
-
nice splitter! hard to fit?
-
@2970a4e662=barrywhite21:
nice splitter! hard to fit?
Nope, easy really (easier than when I put one on the Pug!). About 4 self tapping screws and chop a little off at the arches.
-
cool splitter! does it make the underside of the bumper more flat
and is the new splitter solid underneath, ie : you could bolt up additional corner splitters too it ?! :wink:
got a side shot? cheers.
-
@6bab929de4=youdirtyfox:
cool splitter! does it make the underside of the bumper more flat
and is the new splitter solid underneath, ie : you could bolt up additional corner splitters too it ?! :wink:
got a side shot? cheers.Cheers. Yeah as long as you don't screw/bolt it up where the bumper rises it's flat. The underside is flat too, so I suppose you could put additional corner splitters on it, I'll get more pics later for you tomorrow. I'm debating whether or not to colour code it (and tidy the bumper up at the same time) or not :roll:
-
Cheers for the info,
hope you dont mind but I need the practice on photoshop so i did this for you!
-
so your after these ?
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=110373860688&ssPageName=STRK:MEWAX:IT
-
@31729d0e87=youdirtyfox:
Cheers for the info,
hope you dont mind but I need the practice on photoshop so i did this for you!
Don't mind at all :wink: Hmm, it's a thinker.
@31729d0e87=james:
so your after these ?
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=110373860688&ssPageName=STRK:MEWAX:ITYes, I'm thinking about it…... :oops:
-
Dont do it!!
Much prefer the originals, plus much better build quality.
also, alot of dosh for those headlights.
-
@d992e0f1ff=Mike:
Dont do it!!
Much prefer the originals, plus much better build quality.
also, alot of dosh for those headlights.
I know, I have an utter hatred for these things as well but Mooneggs looks quality with them and I saw another 3 with some on and loved it. Either that or some HIDs….....
I am going for the smoked rear lights though definitely (especially after oor lass said my car looked like a Ford from behind-yes, I know, Mazda=Ford. Ford=Mazda)..........
-
@2e7c87308a=nightstalker:
I know, I have an utter hatred for these things as well but Mooneggs looks quality with them and I saw another 3 with some on and loved it.
I believe the pics I have posted are from when I had custom modded civic projectors… way different from the new projectors that are OEM fit...
I like how the new black projectors look...
-
Im afraid to say I like the new projectors too :oops:
Think they would defo suit your car, and mine,lolIts a shame no-one did a twin headlight conversion for these motors along
the lines of the morette ones for pugs etc!
-
@30c6b5020d=youdirtyfox:
Im afraid to say I like the new projectors too :oops:
Think they would defo suit your car, and mine,lolIts a shame no-one did a twin headlight conversion for these motors along
the lines of the morette ones for pugs etc!Oh yeah, I wish Morette made some too, the swines!
Here's a couple of new pics of the splitter from the side:
And some rim tape got posted through my door this morning also:
-
rim tape looks good
-
@235363a832=jay:
rim tape looks good
:D The missus hates it so it must be good
-
Here's a little teaser :P
A primed rocker cover
:twisted:
I'm just waiting for the laquer to dry and stick it back on and I'll take some more pics.
-
So all dry and re fitted.
I love it. :D
-
good job mate, rockin the flashy rocker…. Nice 8)
-
thats prity sweet i ilke it
-
@db7d275fcc=james:
thats prity sweet i ilke it
Cheers. Any news on the power steering pump?