4. Sam's Proper MX-3 - LT Turbo project *Parting out*

Sam's Proper MX-3 - LT Turbo project *Parting out*

  • Y

    just noticed I need to request a wiring diag.
    from the seller, doh! I'll post it up when
    I got it :D

    0
  • Y

    Had a good mate over this afternoon
    to help me wire in the mirrors :D
    Chuffed that the mirrors are fully adjustable
    up and down too.

    solid!

    wired the turn signal into the side repeater


    My wiring man said he'll do a diagram for me to post up 8)

    0
  • Y

    @8941836ecd=youdirtyfox:

    just some more info on the turbo conversion:

    http://www.boomslang.us/ can possibly build a plug and play harness
    running emanage blue (ignition and fuel) if I send them the schematics for
    around $200.
    schematics here : http://mx-3.com/manuals/index.php?folder=/1995 Workshop Manual/Z/

    I've also enquired into a SPEC stage 1 clutch from the UK
    http://www.specclutch.com/dealers/United_Kingdom
    with a torque rating of 195 lb/ft wich retail at $269,
    yet to find out a UK price though.

    Also some good info here : http://miataturbo.wikidot.com/fuel-injectors

    Ok so I wont be using emanage, but rather an AEM fuel/ignition controller, still want to get my hands on the boomslang plug nplay harness.
    had a little play with the boost hoses.


    a smaller width radiaor i should be able to use an intercooler like this

    of a fiat punto

    0
  • Y

    AEM piggyback turned up after
    I paid the 25 quid import tax.

    and I have spotted one
    of these in my local breakers I think
    to take a look at the radiator
    size>MAZDA 323 F 1.8i 16V petrol 06/89-04/94

    Been doing more searching for the right IC,
    this could be the one > Fiat Brava/Marea 1.9TD.

    0
  • Y

    Two front tyres (sunitrack focus 2000) & one brake light
    bulb later, we have another year of driving from the '3
    :D :D :D

    0
  • H

    Congrats dude!! Nice and Easy MOT!! 8)

    0
  • Y

    Thank Dude! More than pleased that I passed
    with the small number plate letters and my rear
    light mask too, covering up lots of the that indicator section :)

    Had to reverse onto there lowest set ramp at the tyre fitters :lol:

    0
  • Y

    just a pre Japfest polished glamour shot :D

    0
  • B

    Seeeexxxxyyyyyy!!!!!!

    0
  • H

    looking really good buddy.. Can't wait to see it in the flesh tomorrow!! 8)

    0
  • J

    Really want to copy that gril if you don;t mind. As mines black i think i'd use red tubing round the hole. Is there any reason you didn't just connect the bottom grill to the top one to make it even bigger?

    0
  • Y

    I dont mind mate :D the tubing is 5mm silicon vacuum hose
    split up the side.
    So like this?

    bumper would be extremely flexible when cutting that out
    (it could easily fold in half)
    without some serious bracing involved, you would expose
    alot more of the black bumper support and it would be even
    harder to put some nice grill mesh in there…. but dont let
    any of that stop you, if thats what you want it to look like :)

    0
  • J

    pretty sure its not worth that. Think yours looks better anyway.

    0
  • Y

    ar thanks Jim, I didnt want say it was a bit ott
    just in case….

    Thanks Marco for this pic :D

    0
  • Y

    Alright folks, nice little development on the
    turbo front here. Just spent 3 hours @ the breakers
    Found an MX-3 removed the radiator, then spent
    the next 2 hours 45 minutes looking at nearly every car radiator
    in there! until I found this :D

    Boost pipes will easily fit past the radiator now, making
    the intercooler set up so much easier.

    other development taking place this weekend are coralating
    my car ECU loom with the schematics I have from .com, to make sure
    there the same so I can then send them off to Boomslang to make the harness.
    1/3 of the way there to buying the SPEC stage 2 clutch I also require.

    Will do the rad first, then probaly the clutch(remove egr while im there), then get the AEM + boomslang up and running, once all those mods are proven good and working, I can start thinking about putting on the turbo, injectors and intercooler.

    0
  • M

    Excellent, looking forward to this build

    0
  • Y

    Me too!

    someone was aking for a shopping price list for this Turbo conversion
    so here goes:

    323 Turbo manifold >10
    323 Turbo baffled sump >5
    IHI VJ-11 Turbo >90
    AEM F/IC ECU >280
    Boomslang harness >110
    wideband lambda > 130
    SPEC clutch >200 +100 delivery
    Injectors > 20
    Boost pipes/joiners/silicon elbows > 30 - 80
    hose clips > 20
    Intercooler > 10 - 100
    Oil lines > 20
    Water lines > 20
    Boost guage > 30
    Exhaust flexi > 20
    sundries > 40

    Say about 1K is a good estimate there, not including a mapping session
    as we are going for a street tune to begin with 8)

    0
  • Y

    Ok after alot of studying and researching
    diagrams yesterday, we are proposing to
    make our own boomslang patch loom, saving
    a good £££, it dosent look too difficult.

    wiring schematics from .com we are going to assume are
    the same, will test all the ECU pinouts just to be sure though,
    the 95-98 1.6 MX-5 ECU pinouts are the same, bar a few discrepencies!

    So if our loom is a succes, we maybe able to do others for the 1.6
    AEM install.

    0
  • Y

    Started making this today > its going to be a header
    tank for the new rad. install.

    0
  • D

    Looking good,

    maybe some nice polished battery cases are on the cards too if you get any spare time :wink:

    0
 
Copyright 2021 UK-MX3.com | Powered by NodeBB