Sam's Proper MX-3 - LT Turbo project *Parting out*
-
One day I will fully deck it, for the track :D
Thanks dude, gimme something else to tinker on :oops:
Right result on the rear set of spacers, its just in
at the top 8)
Taken the front ones off for now till I decide what to
do about them
-
7J rim (ET35) +25mm spacer is the same as a 9J rim (ET35), not an 8J. ;)
Stock V6 rims are 6JJ x 15 ET45 as far as I can tell from the intershizzle.
-
Yes. Im using 7 inch wide rim + 25mm spacer wich is imitating an 8inch rim.
-
car looks sik ! fmic behind that grill ! also projector lights like SstennizZ
what u fink ?
-
Thanks Jay,
Mmmm projectors, still not 100 percent on them,
wouldnt mind the brighter light, but
think the stock headlights look better on a red '3,
but if I ever get the car painted white then
black ones fo sure 8)
-
Found somewhere that will flare my arches
from 45 quid each :D
http://www.iridiumengineering.co.uk/arch.htm
-
Got my new mirrors today :D
wrong base plates, but you get the idea :wink:
-
@7d63d243f4=youdirtyfox:
Got my new mirrors today :D
wrong base plates, but you get the idea :wink:
Interested to see what these look like on the car, I still want some Ganador mirrors :( but don't do them for the MX3 :cry: (would be a big job to make them fit as well and costing over £200, I wouldn't like to try).
-
@0417bcfad5=youdirtyfox:
Found somewhere that will flare my arches
from 45 quid each :D
http://www.iridiumengineering.co.uk/arch.htmGo ghetto arch rolling with a book and a hammer :wink:
-
I have various assortments of hammers yes :lol:
-
Another little project I'll be working on
for this car, is these escort recaros my mate
donated to me after selling his saxo they were in :
Going to need reupholstery and a new bolster,
but apart from that they are pretty mint not to
mention very comfatable and great for holding
you around corners :D
Luckily the missus has just bought a sewing machine
thats capable of doing leather, but I quite fancy Alcantara :D
-
@54e3fad4ff=youdirtyfox:
Yes. Im using 7 inch wide rim + 25mm spacer wich is imitating an 8inch rim.
**Just so you know, an 8" wheel would be 0.5" further out from the hub and 0.5" further in to the well than a 7" wheel of the same offset. A 25mm spacer pushes the whole wheel out by 1", making it 1" further out from the hub, imitating a 9" wheel of the same offset.
7" + 25mm spacer = 9" wheel equivalent, of same offset.**
-
Yep im with you now, moving the wheel centre out using a spacer
as opposed to an 8 inch rim.
-
Kaboom! Just scored what looks
to be a mint hatch garnish of ebay 8)
-
@e6d50ec88b=youdirtyfox:
Kaboom! Just scored what looks
to be a mint hatch garnish of ebay 8)
Was this off a greeny blue MX3?
-
came off Item number: 160554015313
whys that mate?
-
@49a2b0c684=youdirtyfox:
came off Item number: 160554015313
whys that mate?
Yup, just contacted the guy about it last night, got a reply today saying it had gone this week. You pesky peskier.
-
I had been emailin Him all week pestering
for a proper photo to make sure it was legit, so you
dont even have to be too quick to catch the dirty 'ol foxYou win some, you lose some, I just lost
out on some AEM fuel and ign. management
that went for a ton :twisted:
-
stuck a 12 x 6 plate on the rear, lots of soft cutting in the
sunshine to remove the shadow of the old plate 8)
-
sorry fox but while I do like most things I see on this site, this is where it gets a my back up a little…
(personal view, please don't take it as an attack on you)
While Mazda is a Jap company, the MX3 was released in the UK so it should have the long plate on the back and front.
The AZ3 and Presso, are imports so they should have the square plate on the back and either on the front, like the bumpers are molded to fit.
All this does in my eyes, is show that not everyone can own a JAP import car, but anyone can buy a UK spec jap car and make it look like the uprated model.
I have this little rant at the MR2 owners who add the MR2 Turbo body parts to there none-turbo versions... why? to anyone know knows the difference you just look too cheap to buy the import version but want the road keduos of it.
I'm not having a go at your directly bud, please don't think I am it's a personal view of mine and say the word and I'll edit this post to nothing but please don't leave it like that or at least, find a molded rear bumper to fit that plate off a scrapped import, it's a slap in the face to the people who pay more to get the import version.
Saxo drivers are teh worse for it tho, everyone I see has VTS wheels :(