Sam's Proper MX-3 - LT Turbo project *Parting out*
-
we talking about that big black bar that goes all the way across?
I assume we are :D Yes im going to remove that from the
back of the bumper before I cut the it.
The new grille mesh going in there should cover it back up again
I hope and leave it intact.
-
Productive day today!
decided to go for it with the hard disc cutter,
Little test patch!
Cutting well inside the line,
then tidy up after
with flat side of the disc cutter and debur/countersink
in a drill to tidy corners.
little wire mesh cage for fibreglass:
1st layer of fibreglass
-
nice work i think i will be watching this thread good work
-
cheers Jay, another day spent on the bumper.
First of had to reshape the sides and cut the bottom
corners out, did this with a drill and hand milled em out.
Then smoothed out with emery cloth.
after the second layer of FB I inserted more mesh wire
to bring the shape out more.
cut out the splitter joiner and glassed it back together then whacked
some filler on the top hole,more filling and sanding tommorow, not my favourite job!
but im liking the way this is turnin out :D
-
nice big intercooler behind there will look sweet!!.
can wait to see it finished and fitted.
-
Intercoolers going to be black Garfy so wont show
too much without looking really hard behind this :D
me neither, need to think about getting it sprayed soon!
-
You had any quotes for painting the bumper? Post it to me, I'll paint it for you :wink: Please NO rattle cans :roll:
-
coming on nicely i see you used the smooth splitter idea lol keep up the good work
-
@3033e43655=mx3gulf:
You had any quotes for painting the bumper? Post it to me, I'll paint it for you :wink: Please NO rattle cans :roll:
Yes Ive just taken it round to my local bodyshop (literally round the corner) and He said they will finish off the filler for me, smooth in the
lip properly, fully prep and paint for 120 cash, wich I think is pretty good really. Tbh I wouldnt want any chance of it getting damaged in transit
-
@e770590d7e=youdirtyfox:
@e770590d7e=mx3gulf:
You had any quotes for painting the bumper? Post it to me, I'll paint it for you :wink: Please NO rattle cans :roll:
Yes Ive just taken it round to my local bodyshop (literally round the corner) and He said they will finish off the filler for me, smooth in the
lip properly, fully prep and paint for 120 cash, wich I think is pretty good really. Tbh I wouldnt want any chance of it getting damaged in transitHe only lives on the island sam, just get a lift to gunwarf and take ya bumper on the ferry and meet him there :wink:
-
Yes know mate, theyve offered to finish
off my filling for me, wich is the job i most hate!
plus he said even if i did get it upto a decent standard
he would want to finish it properley anywayz,
dunno see what Gulfy says ?Fog light aperture blanking plugs made now
out of some soffet board I had lying around :D
100mm template made eliptical.
-
Will do it cheaper than that, Are you just taking the bumper to them and they are painting red for you? You fitting it up? Personally I'd dry fit it first, still think that the carrier is gonna be possibly showing, but could be wrong, if its gonna be red again, depending on your turnaround, I will do it for £70 members rates :wink:
-
Yes im taking it to them, no they are finishing off
my bad filling job(top hole and splitter, wich just glassed together at the minute) then fully stripping it back and painting it red and Im fitting it
back on once im able to crawl around on the floor again
(2 weeks) cheers for the offer its competitive once I factor
in travel costs, but the body shop is just too conveniantYes your right the carrier does show alot (nearly all of it infact!) but it will be covered back up again by the grill mesh on the front.
-
ok mate no problem, that stretch of water is a pain in the arse sometimes, make sure you get a decent colour match off your car, either front wing not the bumper, red can be a pain in the arse, could be a few variants, look forward to seeing it finished
-
wouldnt have hesitated if you were on the mainland mate. Yep will do, cheers for tips. Have seen there work before after someone
reversed into the wifes 106 and caved in the rear wheel arch and up the
quarter, you wouldnt of known it after they had finished, muchos respect
for those kind of skills in bodywork, would love to learn it one day :)He said get it in this week as they have some full sprays coming up….
.... I did ask how much they cost and it was 2k.
-
Bumpers gone into the body shop this morning
for finishing and painting, should be back friday/monday!Wheels spacers have arrived, after I paid the extra 25 quid in fees!
-
It's back home already, these Boys do not mess around :D
Very pleased indeed with the outcome, the sheen is incredible,
my filling attempt has just been blown out the water!
Just need to buy the grill surround, cut the mesh and mount it,
wait for a dry day and get this bad boy on !
-
That looks amazing!!!!
Can't wait to see it on!!!!
-
Does look good!
I'd have removed the fog light holes completely but that's a taste thing.
Looking forward to seeing it on the car.
-
@1bc645f889=Lori:
Does look good!
I'd have removed the fog light holes completely but that's a taste thing.
Thought about it lots, and really wanted too though I felt it just too difficult for my skill level given the large contoured section you would have to remove and renew.