Jays work log (1.6 and 1.8 v6)
-
i got 2 pods 3 guage on piller 2 on dash
im useing volt oil pressure boost oil temp and an aem afr
still need to take a pic with all the guages in place this is just after i sprayed the dash after fiberglassing the pod on
-
it will put it in then thanks
your dash looks brill good job :D
-
finaly got round to taking out all my interior to day
and with the seats back in..
just need a good clean now :D :D :D
-
Good work! Get that Jack out too, lose more weight LOL
-
will do :D :D
-
done a bit more to the v6
things done…
move batter to behind the passenger seat but still need to extend wires
moved the water tank to make room for inductionnext on the list of things to do is
find a 2.5 klze
fit carbon fibre seat
lower her
paint wheel
paint carill post more pics when down loaded them...
:D :D
-
started doing bits to the 1.6 ready for japfest
painted tyre brand
and put a new sticker on
-
Not a big fan of the wheel stickers only because they aren't, just my 2p.
Loving the painted tyre branding, I wanna do this but the effect would be crap on 4x different budget jobbies :lol: (when I get the spec 2's ;) )
-
i was a bit unsure about doing the tyre branding but im glad i did it looks good as for the wheel stickers thay came with the car lol ..
next job for the 1.6 is a new exhaust :D :D
-
@02ad94bc74=jay:
i was a bit unsure about doing the tyre branding but im glad i did it looks good as for the wheel stickers thay came with the car lol ..
next job for the 1.6 is a new exhaust :D :D
I need to get a nice burbler on mine too (I've got a potato cannon Rage SSX 150 sat around but I'm unsure about it, it's a bit dated and, erm, chavvy).
-
@f07de62778=nightstalker:
@f07de62778=jay:
i was a bit unsure about doing the tyre branding but im glad i did it looks good as for the wheel stickers thay came with the car lol ..
next job for the 1.6 is a new exhaust :D :D
I need to get a nice burbler on mine too (I've got a potato cannon Rage SSX 150 sat around but I'm unsure about it, it's a bit dated and, erm, chavvy).
im looking for some thing that sounds mean and looks well too preferably
jap
-
I always liked the idea of taking an exhaust off a production car which has stainless as standard. Like a 350z or something.
-
@07e6360cca=Marco:
I always liked the idea of taking an exhaust off a production car which has stainless as standard. Like a 350z or something.
i hadnt thought of that i will look into that
-
@6bc831c508=jay:
@6bc831c508=nightstalker:
@6bc831c508=jay:
i was a bit unsure about doing the tyre branding but im glad i did it looks good as for the wheel stickers thay came with the car lol ..
next job for the 1.6 is a new exhaust :D :D
I need to get a nice burbler on mine too (I've got a potato cannon Rage SSX 150 sat around but I'm unsure about it, it's a bit dated and, erm, chavvy).
im looking for some thing that sounds mean and looks well too preferably
japI like the look of this
(Plus it's direct fit so no worry about dodgey welds)
-
@2262c7b4b7:
I like the look of this
(Plus it's direct fit so no worry about dodgey welds)
this is tempting thanks mate
-
sportex is pants mate just as bad as ripspeed etc…..
-
@bb8d424a63=jay1987:
sportex is pants mate just as bad as ripspeed etc…..
thanks for the heads up.
-
I have had one of those Sportex exhausts for over 3 years now and fitted it on 2 cars, sounds great and never had a problem and it fitted perfectly
-
@9ff53a9a63=djmarcopolo:
I have had one of those Sportex exhausts for over 3 years now and fitted it on 2 cars, sounds great and never had a problem and it fitted perfectly
thanks. i guess its personal choice
-
Well i have a sportex for WES and no i aint telling which one yet, very pleased with the finish but i did have it walnut shot and resprayed excellent fit also..
