V6 turning over but not igniting PLEASE HELP
-
sounds like the distributor to me
-
95% sure distributor its a a fairly common fault on our motors heh.
-
and why is that? Shitsubishi made it! And what other part did they make that often freezes up? The rear calipers!
-
Didn't they also make the VRIS solnoids?
-
why are yours broken? :lol:
I think you're right, I think the solonoids (inc FPR etc) are mitsu. Though the actuators are mazdarrrrs genious, so doubt they'd outsource that, that'd be like honda outsourcing VTAKKKK YEOWWWWWWW
-
Not sure if this applies to MX-3, but on later Probes, if the crank position sensor plug is loose or dirty, the car will not run at all. Worth a check.
-
Yep worth checking as it does apply to mx3s. If it were me I'd get the LED out and pull some codes ;)
-
Thanks for all the suggestions i've picked up a replacement distributor so ill let ye know on Wednesday if that was the culprit.
-
@a9bd4889a2=Nipper02:
Thanks for all the suggestions i've picked up a replacement distributor so ill let ye know on Wednesday if that was the culprit.
Did you try the CPS plug before you spent your cash? You possibly dont need a distributor.
-
Sorry bout the delay, it was indeed the distributor….. simple fix luckily picked one up from a breakers yard in Sligo for €50
