Marco's Black Beast aka 'Sooty'
-
@5de8134cba=Marco:
The biggest problem is the oil filter housing. I bought a second hand (but unused) MBX oil relocation kit. Essentially it is:
-an aluminium plate shaped like the oil filter housing with 2 threaded holes
-2x braided oil lines
-a generic oil filter housingSo now my oil filter is mounted remotely. Aside from that, making a bracket for the SC to go on the AC spot was pretty easy :)
I'm sure I can dig out some pics for you later.
If I remember rightly the M45 has a built in oil chamber.
-
You're correct, the m45 and m62 do not require an external oil feed. The oil lines are for the engine's oil filter, not the supercharger. You know the housing on which you screw on the oil filter? That is the part that must be relocated, hence the oil relocation kit. Otherwise your oil filter will interfere with the supercharger, unless the m45 is significantly smaller than the m62.
-
Yes the M45 is quite a lot smaller but I see what you mean now. Yes it will need a relocated oil filter, my biggest concern, however, goes with the placement. On the 4 cylinder, the placement of the driving pulleys seem to leave little space for anything else let alone a charger, I feel there may have to be a lot of re jigging involved :?
Whilst I'm on the subject. Did you change the pistons? I've been advised to get some with a lower rate of compression to make it work properly…
-
@00e2fd4fb5=nightstalker:
Yes the M45 is quite a lot smaller but I see what you mean now. Yes it will need a relocated oil filter, my biggest concern, however, goes with the placement. On the 4 cylinder, the placement of the driving pulleys seem to leave little space for anything else let alone a charger, I feel there may have to be a lot of re jigging involved :?
Whilst I'm on the subject. Did you change the pistons? I've been advised to get some with a lower rate of compression to make it work properly…
Hmm couldn't comment on the Bseries, never had one. I'd imagine there to be more room! Nope I'm still on 10:1 ZE pistons! Just means I've less room for fk ups!
New video of some drive bys:
http://www.youtube.com/watch?v=fnwG-0zzJNY
-
Simply awesome :D
-
Thanks dude :)
Just finished my first full tank since the supercharger. It included a round trip to Dublin to see Blink182.
300 miles for the tank
40 litres used
34.1 mpg:D Still running a bit rich cruising too! 35+ here we come…
-
Very impressive, im sure mines about 20 lol
-
filter needs to be moved for the 45 as well
-
Not much going on atm! So here's some photos. New gauge pod in.
-
Loving the flaming exhaust very F&F. 8)
-
Nice pictures, looking real nice :D
I have some Mr Sheen here for the dashboard if you need any :lol:
-
THanks mechanic :) Call me torreto… :lol:
DJ... you cheeky :x haha that dust is pretty bad, and thanks :)
-
Well hasn't my engine just gone to sh**
-mega blow by, oil escaping anywhere it can
-head gasket starting to fail and weeping out rear bankSo I have another KLDE bought, haven't decided to build it up with forged bits or not. Really need to make some decisions on what I want to do.
In the meantime, I've been working on my latest engineering project:
Heavily inspired by clairetoo and leo323 :)
-
Throttle bodies FTW!! Is that on a KLDE?? More info please!! :wink:
-
haha well that's on my old k8 atm, I just use it for prototyping on as it's largely the same. What would you like to know?
-
marco, im starting to hate you lol, is there nothing you wont try or have on a mx, all that is left now is to slap a turbocharger on there !!.
I have been seriously considering throttle bodie conversion but i want to know power estimates before hand as if i did anything to ze id want min 250bhp for all the hard work. Claire got 206bhp out of the de engine, so there is a bit of hope for good gains on a ze. And an 11 sec 323 is not to be sniffed at either !!.
As always loving the work, keep it up !
-
I wish I had the knowledge to go that far with my car.
I do have a camera that takes photos into the future and took this of sooty in 2015, loving the work :D
-
@5447cfb332=djmarcopolo:
I wish I had the knowledge to go that far with my car.
I do have a camera that takes photos into the future and took this of sooty in 2015, loving the work :DHubba Hubba Hubba
-
Gotta love those ITB's :o
-
The last V8Interceptor.
