Mechanic's - Track/Street Project
-
The power is ok, the brakes are unreal and lowering the centre of gravity helps no end.
Its almost got rid of body roll completly. 8)
-
and how is the ride lowered that much?
-
Used to my scooby power just over 300bhp, then i was using my mates M3 ac schnitz tuned that was about 380bhp. Then i had to buy another house and needed the money. So 200bhp is just enough to get to work :lol:
The lowering springs another coil removed, so it's nice and slammed with rock hard suspension as the shocks can hardly move, suits the way i drive. :twisted:
-
i was thinking of a 30mm drop, low but spine crunching low.
the girlfiend would just be moaning :wink:
-
wish mine had 30mm drop i have 45mm
-
@571dbe29f0=Stephen-mx3:
i was thinking of a 30mm drop, low but spine crunching low.
the girlfiend would just be moaning :wink:
My girlfriend moans like hell but not about the car :shock:
Have trouble getting onto my drive lol might have to jack it up slighty :lol:
-
with my 45s i have troble going over speed bumps
-
Installed my thermo inlet blocks.. nice and easy to do within one hour.
Notice a slight increase in power, just love the fact the inlet is now so much cooler.
Would suggest getting them of http://www.fordprobestore.co.uk/store/ rather than http://www.outlawengineering.com/
-
Good stuff. The import duty bandits didn't get mine :D Seems I got lucky!
-
You lucky bugger… :P
-
sounds good. get anywhere wit modding the bonnet to let some of the heat out?
-
No yet feel guilty about cutting holes init. I removed the large rubber strip that sits between the bonnet and firewall. To see if it let more hot air out but all it did is cause the bonnet to vibrate.
I have installed 2 cold air feeds that go from the nearside front up to the cone filter. But these keep scraping the floor under braking lol. Will get a pic up.
-
Ordering my new 2.5 inch custom exhaust system tomorrow, will take photos and try and get a build guide up with link to parts with cost etc.
Broom brooommm :twisted:
-
moaning about 30mm and 45mm being low tsk tsk :P
my mates civic is 120mm on front and 110mm on back, yes it feels like ur spines going to xplode, but handles well and gets some looks :)
good luck with project mechanic!!!
