Jamess new mx3
-
139 hp? I tried to look through your worklog but what is that with a CAI, exhaust and a stock k8?
-
i got 140 and 148 on a k8, don forget we run 98+ ron go go juice
-
@ad7d5d2d3f=robx1r:
go go juice
:lol:
-
@5a81fb2dc9=Mooneggs:
139 hp? I tried to look through your worklog but what is that with a CAI, exhaust and a stock k8?
Don't forget we also have a tendency to measure at the fly, not the wheels…
-
im running manifold decat powerflow back box
and a green air filter without a cold air feed
-
he he new mod led heater controles woo coz its not pluged in you cant see but i also did all the green ones in the top of the switches
and for some reson in the pic the red dident come out but it looks ok
-
i'm loving the blue controls mate.
You still want my speedo etc? sorry it took so long to reply, been kinda shit due to redundancy :cry:
-
nah sorry picked up freedoms when i got the lambos
-
would you care to share how you did the blue lights? I want to change mine from green to blue as well…
-
took it all apart un solderd the standerd genn led in the top (the selection led) re solderd with blue ones
took out the 2 standerd switch bulbs
the the clear plasic defuser thers notches about each switch i hot glued an led on the top of each wired them all together and solderd the 2 wires right to the bord where the standerd bulb went tryed to close it back up but riped the led out so i cut holes around where the leds were pulled the legd up through th caseing and re wired it exeternaly if neede i can take it out agen to take pics
-
finaly finished polishing the rockers ready for the new engine
-
Jesus they look good, mine used to be like that….. they then went yellow now they are black...
Good job
-
engines nearly there now still need to buy a cam belt kit to finish it off
and a new lovly pic
-
geting there now this is not the rocker im gonna use its just on temp to stop crap geting in but this is how shes looking now
-
Looks really good, just a bit of advice, the pipes at the front of the engine, yours are blue they go to a heat exchange on the oil filter plate.
Try and use heat wrap on them, its like doubled sided sticky foil, i take it you are going to put 3 branch manifold on. These come very close to those pipes and get very very hot, a pain in the ass to change once in the car.
Top job though :D
-
yeh i have a heat raped manifod and i cut them so there not to close
-
Cool beans i didn't want all that hard work to be spoilt. :P
-
just a quicky balancing on the skirts ive had for nearly 2 years
and a filler project whal wateing for funds
dash pod from an fto
-
Lot of time, money and effort spent on your car James, Good work, really nice car :D :D
-
thanks man
