94" weede`s MX-3ZE Supercharged

weede_klze

ello, My name is Jerry and I come from Poland ;)

Here is my 94` Mazda:

2011 SETUP

Engine:
2.5v6 KLZE engine
Full rebuild mostly on OEM parts
ECU with KLZE maps
KLZE straight neck intake
CAI with carbon box
2,5" exhaust with twin-loop OBX mufler
2,5" ss headers
Gulf Racing 10w60 oil

Driving
K8 gearbox
Exedy KL clutch
short-shifter

Brakes:
Full rebuild
Speedmax rotors
Goodridge ss lines
Motul RBF600

Suspension
Tokico HP Struds
Ground Control Coilover Kit with Eibach springs
Eibach cambers

Wheels
Dragwheels DR-23 Rally Bronze 16"
Yokohama AVS 205/50 tires
Dragwheels black screws

Interior
ALPINE CDE-101R
323 GTR momo steering wheel
momo hub

Some pics:

Some Parts:

My YT Channel: http://www.youtube.com/user/MrAdrenalineaddicted#p/u/3/5pagRhMN4wM

Best regards ;)
weed

djmarcopolo

Hi jerry and welcome, nice looking car, the interior looks nice without the sunroof up there, you just need the rear mudguards to make it completely oem and I have seen a white pair here in the UK to match that if you need them

Has Been Banned

welcome to the site stunning car fella

youdirtyfox

Hi,
Your Mx-3 is looking fresh , like a breath of fresh air
infact, modified in all the right places and a non sunny
in White! 8)

Sam.

weede_klze

TIME TO END THIS SEASON :D

Sparco Torino II

Must clean them and will be awesome

sparco rails

Custom seat brackets (without sparco sliders yet)

And if we want keep a standard seat-belts:

seats onboard! :mrgreen:

MEGA RARE (I love it :lol: ) KL transmission with Mazda LSD (option in japan to MX-6 KL). Longer gear that K8 has.

On the left side of course.

III gear from PAR Engieneering with straight cut gears

Full ACT clutch with 6 pads

…and test after upgrade ;)

OEM torsen LSD for mazda KL gearbox is just amazing! Speed in the corner is much much bigger. And traction on streight is also better.

Wheels spins in the same directions with LSD :lol:
http://www.youtube.com/watch?v=HZbUeKvgjgw&feature=channel_video_title

With turbo-friends ;)
:lol:

Last local track-day

MOVIE:
http://www.youtube.com/v/fCBk9PeQM2k?version=3&hl=pl_PL

It`s high time to add some power for mazda ;)

Millenia S rods:

Fuel regulator:

Millenia S 280cc injectors (will be working with 3,5 - 4bar on rail)

And more:

walbro 190 fuel pomp
anodised fuel rail
new rubber for injetctors
custom fuel rail adapter

mx3gulf

Good work :wink:

daniel wiley

love white ones :D

djmarcopolo

nice work :mrgreen:

weede_klze

BIG BRAKE KIT - MAZDA 6 - 283mm width and 25mm th. :D

323v6 spingle (powder coated) + OEM KOYO bearings + new seals

whole calipers were diassembled and powder coated

and assembled with new seals

4x100 CNC drilled

in action :D

…aaand ready, back side

…front 8)

my setup looks like this:

FRONT:

323v6 spindles
mx3 bearing
mx3 hub
mazda 6 calipers with new seals
mazda 6 BREMBO rotors with 4x100
custom spacers
Goodridge steel lines
FERODO pads
MOTUL RBF600 fluid

BACK

mx3 BREMBO rotos
mx3 calipers + new seals
Goodridge steel lines
Kashiyama pads

And at last, my girlfriend christmas gift :D

jayom

Great stuff, Jerry, the car is looking awesome. Brilliant work!

youdirtyfox

Very nice setup indeed :)

Garfy1981

looks good, but surely walbro 190 fuel pump is just as good as OEM, isnt the 255 the common upgrade lifted from the rx7 ?

love a mx track toy!, hence im building one also. :)

weede_klze

Some more stuff…

Oil-Relocation-Kit

MOCAL Take-off plate, MOCAL mount, MOCAL plate with thermostat + Knecht Filter. And yes i bought MOCAL oil cooler :lol:

IC 550mm

Soon more updates…

weede_klze

Few more things:

Mocal Oil-Cooler

Eaton M62 inlet flange

…and outlet

And that would be mount

After tests I gave this for laser-cut ;)

youdirtyfox

Very tasty :respect:

weede_klze

hanger project for supercharcher - it has 2cm regulation left-right direction. Still without mounting holes (will be ;) )

My SC hasn`t this one mount (previous owner cut it)

weede_klze

Meantime…

I took a part with out Poland mazdaspeed meeting with 1/4mile and track attack :)

And I was 1st in my class on 1/4mile (beat few rx8 and other ZE car ;) ) and 3rd on track.

Engine is going out in next week and will be complete rebuild on OEM parts with straight neck intake and millenia s rods and injectors. Supercharger will be also under the hood but not clutched.

Marco

Nice one! What times you get on the 1/4 mile?

weede_klze

14.8-14.9 but surface was poor.

weede_klze

Final project:

Cutted and fitted

AEROQUIP:

Oil filter relocation adapter :)

adn fitted:

Set for additional pulley for supercharger belt

…and fitted ;)

Adapter for fuel rail which is necessary to install Turbosmart fuel regulator

And washed car preparing for engine rebuild :)

Next stage is remove engine from car and full rebuild on millenia s rods and of course supercharger (still not clutched for time when engine is run in)