Fitting Cone air filter into a 1.6i
-
what are you plans for car?
ive just done some reasearch and it my be better to look into swaping the sohc for either the dohc or a bp engine there isnt much you can do with the sohc if anything :cry:
sorry its not possitive info
but if you dont wish to swap the engine we will help out as much as we can to help you.
-
heres a link to my work log
http://www.uk-mx3.com/forum/viewtopic.php?t=1970&postdays=0&postorder=asc&start=120
and nightstalkers
http://www.uk-mx3.com/forum/viewtopic.php?t=2151&postdays=0&postorder=asc&start=135
-
@64d6a06ab6=jay:
heres a link to my work log
http://www.uk-mx3.com/forum/viewtopic.php?t=1970&postdays=0&postorder=asc&start=120
and nightstalkers
http://www.uk-mx3.com/forum/viewtopic.php?t=2151&postdays=0&postorder=asc&start=135
:( I don't think I can do an induction kit due to my stupid air flow metre sensor pipe which makes ol' Bert stutter if it is removed :evil:
-
@cbd5e69914=nightstalker:
@cbd5e69914=jay:
heres a link to my work log
http://www.uk-mx3.com/forum/viewtopic.php?t=1970&postdays=0&postorder=asc&start=120
and nightstalkers
http://www.uk-mx3.com/forum/viewtopic.php?t=2151&postdays=0&postorder=asc&start=135
:( I don't think I can do an induction kit due to my stupid air flow metre sensor pipe which makes ol' Bert stutter if it is removed :evil:
im sure we could come up with somthing to make it possible
-
What other cars had the same SOHC engine in them?
Might be worth a look to see what Air Flow Meter and stuff they used?
It may be interchangable? you never know….
Didn't the 323 have that engine???
-
Must be possible just found these SOHC MX-3 pics:
Refered to as 'Custom Spectre Intakeand filter'.
-
Had to laugh at how this guy did it LOL :lol: :lol: :lol: :lol: :shock:
And he has it a different way here:
Just so you know why its covered in crap, he does offroad creak racing in it!
-
More pics:
-
Done some research:
You need to fit a converter to the End of the Airflow Meter that will change it to a round end so you can fit a filter to it.
AND
-
Aparently an RX7 flow meter?
I quote:
@4fe3fb5900:
But to any you 1.6 guys if you can get ahold of a 2nd gen rx7 MAF throw that on you'll love it.
Can't see what difference it would make myself????
But might be worth googling?
-
Would you not just save up a few quid and do a BP engine swap? From what I read on the mx-3.com forums when I was researching them you'd have a very easy time doing it, since your car has the SOHC engine & would be OBD1.