MDM MX3 3 stage project, neone wana roba bank with me ha ha
-
not to worry, all good fun, you can tell me all about your coilovers ;)
-
or you can see them for yourself?
-
that too!
Whats the status MDM?
-
well now, they put on the correct manifold, everthing in, New CV joint on driver side, new clutch cylinder, battery and exhaust.
And it wont start lol. Oh i swear im glad i got them to quote me before they started.
Its turning over alright but just not starting ne ideas to whats the prob lads????
And Marco check out the JT coils
http://jeroentje.nl/index.php?page=product_view&auto_id=0150&product_id=70150210or
http://jeroentje.nl/index.php?page=product_view&product_id=9015040&car_id=4
If ya could give me a word back about starting it up cheers lads
-
1. What Distributer did you use?
Its best tu use the one that came with the loom, so use your old K8 one and use the same plug lead order as was used on your K82. Has it got spark?
Take a spark plug, keep it attached to the plug lead, put it down on part of the engine it can earth to, then try to start the engine, does the plug spark?3. does it have Fuel?
Take off fuel return hose, then try to start the engine, does petrol come out? and if so is it pumping out well?4. Describe what is happening when you try to start it?
Do the above things and let us know what happens then we can help you.
-
Thanks for stopping by ukmx3admin
well the old dizzy was used and the firing order is the same with every spark giving light.
Plenty of fuel in the system too….
Funny though when they put on the stock K8 IM by accident the engine started up no prob, sure sounded rough but still started. Ever since they put on the new curved neck manifold it wont turn over. Just turning and turning with no ignition.
Could it be with the vacume lines????
-
Well lads….................. Shes running lol
Just off the phone to them, the guy they got to put it in for them( polish fella, he's gone home now) put in the crank positioning sensor wrong. nothing got to do with vacume lines.
Geting her Friday thank god!!!! :P :P
All thats left in this phase is to get the chip and exhaust
and any irish fellas out there, total for installation and engine 1350 euro.
Fu** me i cant wait to test drive :twisted: :twisted: :twisted:
-
Nice one! Welcome to the Irish club of now 2 ZEs :lol:
-
Glad its getting sorted, your gonna love the power… :twisted:
-
congrats on getting it sorted bud,, enjoy the drive…
-
Be nice to see some pics of the car?
-
Ya defo, not much change but be good to see a progress report sort of thing,
Ill try attach them to a site somewhere so, not great at this whole computer/internet/link stuff lol
-
@dbc51fd033=MDM_MX3:
Ya defo, not much change but be good to see a progress report sort of thing,
Ill try attach them to a site somewhere so, not great at this whole computer/internet/link stuff lol
add me on msn, and send me the pictures ill put them up for you mate, easy as that way :)
-
hey lads, just having a small problem, ye might be able to help me out,
to start the car when the engine is cold i have to disconnect the engine coolant sensor near the coolant cap. reconnect it when it warms up.
Now my K8 had two engine coolant sensors near the car(3 prong) and a 2 prong sensor.
Now my KLZE curved neck engine has only one, could this be the prob too??
Also note my K8 ecu is not chipped yet
Please help asap as im getting it back friday from the garage.
-
Luckly my K8 and KL both had 2 sensors so the loom plugged straight in. Dont suppose there is a blank on your KL that the sensor can go in is there.
Dont think that using the unchipped K8 ECU would cause cold start issues.
Sorry cant be of much help to you. :cry:
-
Cheers mechanic,
Would you think it be okay to drill a second hole in the same posistion that the k8 2nd sensor was?????
-
my k8 and kl have both sencers you can allays take off the inlet and swap the water pipe with the 2 sencers on
-
@c40d6d8b9a=james:
my k8 and kl have both sencers you can allays take off the inlet and swap the water pipe with the 2 sencers on
There you go there is the answer lol.
-
@af71b7db7d=james:
my k8 and kl have both sencers you can allays take off the inlet and swap the water pipe with the 2 sencers on
That's what I did, then after it was installed I saw that I didn't even need it :lol:
Yes you could drill and tap and put the sender in, you will see the flat metal where it should be. Just make sure no shavings get around or your water pump etc won't be around for long. Ideally take it off. Other option would be to get an inline adapter for temp senders - cut coolant hose in half, insert inline sender thing.
-
do you think the reason i cant start the KLZE is because i only have one sensor marco?
If i put in the second would it work perfectly????
