Ground Wire Kit
-
i work for an electronics company, there is all types or wire and crimps available. im gonna make my own. im thinking of replacing the original isted of adding more. ive measured the resistance of the main chassis to battery cable and it was 20 ohms. should be nearer to zero!
-
4 Terras, i didnt get all technical, but i noticed this car model has some baddd grounding.
That is why i noticed some changes when i placed it ;)
I advice this mod to anyone with a MX3 :)
-
what cable do i use to make my own.
my only mods are a cone filter and a ecotek vaulve.
-
all you need is some cable the same size as your positive to your battery, that way the resistance should be the same and will give a better circuit. Obviosly (or maybe not) the longer the cables the more resistance there will be. Use copper cables as they have a low restivity, and for ease of crimping get the stuff with lots of strands as it will form better in your lug.
-
thats right James, the longer it is the more resistance, but also good quality wire is needed,
JDMC, a ground wire kit is basically just a set of wires that connect to the negative side of the battery and certain points of the car, (engine, chassis etc) and offers better negative grounding for the car, so basically fitting it is just doing above 8)
-
i mite post a pic of the one i made at work. if there is interest trhen i could make some up and sell them on the site for a very small fee ( £5 posted maybe ) . ive only replaced the main battery negative cable. the origonal one needs to be cut off of some type of loom cos it goes to some other components. thenm bolt in the new one.
anyone interested :?:
-
yer i imagine it goes to the ignition :?
-
it goes from the battery to the chassis.
-
oooo 4 terras you still up for makeing some ?
can i have a pic of yours ?
-
second that motion!
still wanna make a few up??!!
-
@c7caba6b6a=4:
i mite post a pic of the one i made at work. if there is interest trhen i could make some up and sell them on the site for a very small fee ( £5 posted maybe ) . ive only replaced the main battery negative cable. the origonal one needs to be cut off of some type of loom cos it goes to some other components. thenm bolt in the new one.
anyone interested :?:
pm me if you do them mate and il take one.
atb
-
was gonna buy one but im going with this instead, total cost: €35
-
Here's a link for a kit available on ebay now…
-
This shouldn't be too hard as a DIY project.
Called in my local car spares shop today and they have all the stuff.What happened to 4terra making them up?