Slight problem
-
Well went to try my new wheels on and came across a slight problem.
Note this picture
The wheel nuts do not fit, not even the standard ones, there's barely a gap between the thread and the hole.
Any ideas anyone?
-
what offset are the wheels?
-
@bbfbbb1668=youdirtyfox:
what offset are the wheels?
38, didn't think this would be that much of a problem. :(
-
welll thats right for starters.
Is there no thread you can get to at all?!
-
@90635112b5=youdirtyfox:
welll thats right for starters.
Is there no thread you can get to at all?!
Can't get the wheel nuts in to the holes, that's the problem.
-
you need inverted nuts heres a quick example
-
@a877114f25=robx1r:
you need inverted nuts heres a quick example
:lol: sounds painful.
-
those wheels must use different type nuts then?
what they off?
-
you can get them cheaper around 40 for a set.
and just a question how come your nails are painted red?
ohh link added
-
@8429d5acbb=robx1r:
you can get them cheaper around 40 for a set.
and just a question how come your nails are painted red?
ohh link added
Lol, got our lass to hold the wheel up while I took pictures
-
@79d54ad2ab=youdirtyfox:
those wheels must use different type nuts then?
what they off?Guy had them on a Sierra Cossie.
-
@e08e292382=nightstalker:
@e08e292382=youdirtyfox:
those wheels must use different type nuts then?
what they off?Guy had them on a Sierra Cossie.
Nice!
shame about your nuts though bro…
-
here ya go nice and cheap
-
@985d1a70c9=robx1r:
here ya go nice and cheap
Ah, sweet, any ideas what size I'd need? I can't remember off the top of my head…..
-
@7eabe7f5ed=nightstalker:
@7eabe7f5ed=robx1r:
here ya go nice and cheap
Ah, sweet, any ideas what size I'd need? I can't remember off the top of my head…..
Found it. 12x1.5, must remember this…
-
you need a set of TUNER NUTS theres a few wheels that use smaller width nuts to fit them
Email this shop owner he has all of them in stock and will point you in the right direction for your wheels, this is just a set of lockers listed