Wheel spacers and stud extensions
-
those ones in the second link come with a screw on type stud extender I think.
Funnnliy enough I emailed essex racing yesterday to see if the did 54.1
center bore / 4 x 100mm , but they dont and Im not even sure if those
spacers you posted up come with the stud already installed into
the spacer, so i emailed backFull on H&R or Eibach hubcentrics are 100 quid a pair!
-
The ones I posted have the stud properly fitted, those you posted seem to have a cheap metal stud extension that the spacer fits over, I can just see a weak point on those extensions
-
aye they do look dodgy dont they!
-
when i enquired about these :
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=380249616530&ssPageName=ADME:X:RTQ:GB:1123I got this reply :
Hi
These come with bolts to bolt this spacers on
You use your original bolt to bolt on the wheels
Mike
-
@ce8536cd74=youdirtyfox:
when i enquired about these :
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=380249616530&ssPageName=ADME:X:RTQ:GB:1123I got this reply :
Hi
These come with bolts to bolt this spacers on
You use your original bolt to bolt on the wheels
Mikeyeah you put the spacers on the standard bolts, do them up with you your original nuts or the ones in the pack and then fit the wheels to the studs on the spacers and use the spare nuts to do them up. Its a much stronger system than the stud extenders and those will give much more friction between the inside of the wheel and the spacer.
The studs hold the wheels on but they also use the friction of the flat surfaces that are squeezed together to give more purchase to the wheel, those others do not have much area for the wheel to grip to so you will get more forces on the studs themselves
-
VW's use wheel bolts I think as opposed to studs so I dont think they
are going to work without having to buy new bolts,
plus stud and nuts are sooo much easier for removing/refitting wheels.Those are cheapest Ive found so far :D
-
Set of 4 there for almost same price
-
Oooh nice find!
4x4.25 (vehicle) > dont understand this bit though??
bolts to:
4x100mm (wheels)
4 x 100 to 4 x 100 :D
-
4.25 inches is 100mm :D
Americans do everything in inches I am pretty sure thats their system
-
Yep your right :oops:
Better get ordering an maching up a locating ring for the inner bore! :D
-
Its cool mate no worrys 4 x100 to 4 x100 is above
-
also similar age toyotas to our MX's have the same stud pattern and spigot size of 54.1
Mazda 323 91-94
Mazda Miata 89-05
Mazda MX-3 92-95
Mazda Protege 91-98
Scion xA 04+
Scion xB 04-07
Toyota Celica All 4 Lug
Toyota Corolla 93+ All 4 Lug
Toyota MR-2 00+
Toyota Paseo 92-99
Toyota Tercel 89-02
Toyota Yaris 07+