DILLIGAF?: Project Ratty
-
Set of Tokico ZX2s would go well with those springs. ;)
Anyhow, since the PM system on UK-MX3 seems to be on holiday, have a look at this.
http://www.mx5nutz.com/forum/index.php?showtopic=42329
It's DIY, but it helps you understand what you need to do if you did any blower install.
It's a hotside install - i.e. it's over the exhaust. This is not a problem - although it might be somewhat more of an issue in an MX-3 / FWD engine bay.
Also, DIY means time. Time the car will be off the road. If you can't do that, forget it. Otherwise, buy a second MX-3 (V6!) or something supercheapy to get you about. You'll never make money on it, it's all about the craic.
Let me know if you want to do this, we can sink a beer or two and I'll help you design and fab (get fabbed) a transverse kit if you like.
-
@07d3724cd8=Venari:
Set of Tokico ZX2s would go well with those springs. ;)
Anyhow, since the PM system on UK-MX3 seems to be on holiday, have a look at this.
http://www.mx5nutz.com/forum/index.php?showtopic=42329
It's DIY, but it helps you understand what you need to do if you did any blower install.
It's a hotside install - i.e. it's over the exhaust. This is not a problem - although it might be somewhat more of an issue in an MX-3 / FWD engine bay.
Also, DIY means time. Time the car will be off the road. If you can't do that, forget it. Otherwise, buy a second MX-3 (V6!) or something supercheapy to get you about. You'll never make money on it, it's all about the craic.
Let me know if you want to do this, we can sink a beer or two and I'll help you design and fab (get fabbed) a transverse kit if you like.
yeah, Fam sent my that link a while back, to be honest I can't take the car off the road at the mo (let alone buy another car!) although I am very close to getting my old job back which would mean I could bike to work and work on the 1600 :D
When you're back up here get Fam to let me know and we shall all hook up for a beer and geek about engines.
-
Well hello, I am unbelievably bored due to being off work after injuring my knee. So today I hobbled into the car and removed the dash bezel and shroud to give it a sprucing up after trying my hand at wrapping it with carbon and failing BIG TIME!
I've also started an LED conversion on the dials which will be finished next week (just waiting on some more bulbs :roll: )
So here it is so far
Alsomade a boring vid lol
-
Oooh, more ebay excitement, well, not really, just some essential stuff as the MOT is next week (wish Bert luck peeps!)
Just so they know what engine it is obviously, a much needed MOT item :lol:
Oooh, my exciting new brake discs (£17 a pop, can't complain).
-
Where you get the £17 discs from mate, I need a few soon :) cheep and chearfull to pass MOT, also, Bulbs what ones did you use?
Looking good tho bud, :)
-
@e26d2ad0c6=Lori:
Where you get the £17 discs from mate, I need a few soon :) cheep and chearfull to pass MOT, also, Bulbs what ones did you use?
Looking good tho bud, :)
Smaller bulbs
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=250516983557&ssPageName=STRK:MEWNX:ITLarger sidelight style bulbs
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=280512510330&ssPageName=STRK:MEWNX:ITDiscs (make sure you order 2 as I didn't the first time round :roll: )
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=260567943836&ssPageName=STRK:MEWNX:IT
-
Thanks bud :)
-
Sooo, It's night time and time to look at the LED convo. I knew some of the bulbs weren't working (already emailed the guy about it) but the ones that are working, fekkin spot on!
Now just waiting on 4 more bulbs and 6! replacement bulbs and it should be done :D
-
looking good!! I hope the LED's don't burn out. I tried some for a while and because they are on the dimmer circuit it seems to put a higher load on them or something… not sure... I hope it works out for you though!
-
@8016d44cab=Mooneggs:
looking good!! I hope the LED's don't burn out. I tried some for a while and because they are on the dimmer circuit it seems to put a higher load on them or something… not sure... I hope it works out for you though!
Hmm, I'll keep my eye on them, I never quite understand the dimmer option on dashboards. Why would you not want to be able to see your dials at night?
-
well I commonly turn mine down way low so it's less glare so I can focus on the road…
right now I'm running stock bulbs with red lighting... kind of like inside a stealth vehicle haha 8)
-
@c4439039f8=Mooneggs:
well I commonly turn mine down way low so it's less glare so I can focus on the road…
right now I'm running stock bulbs with red lighting... kind of like inside a stealth vehicle haha 8)
Tbh im the same i turn mine down as myself i feel i see the road clearer at night and dont have a distraction from the dash..
Mind you some nice subtle interior lighting ie: red or blue would be nice got me thinking here now ….i see a new addition coming..
-
Nightstalker, Did you just swap the bulbs over, or did you change the tinited plastics over the top?
Mine have a red tinited plastic covering, so trying to get any other color that won't have a red tint is going to be a nightmare lol
-
@485da16426=Lori:
Nightstalker, Did you just swap the bulbs over, or did you change the tinited plastics over the top?
Mine have a red tinited plastic covering, so trying to get any other color that won't have a red tint is going to be a nightmare lol
Yeah, just swapped the bulbs over and removed the tint completely.
-
Thanks to some great guys on here (Ryan and Famine) Bert will be getting lippy. Ryan has given me his old broken OEM lip and Famine is giving me the half that Marvin has as well (the side that is broken on Ryans) as the number plate mount when I go and purchase his rear seats (to replace my tatty ones) on the weekend :D
I've now got all the bulbs I need to finish my LED dash convo so when it's dark I shall post some pics up (if I'm still awake- god damned early shift this week!).
Hopefully by the weekend Bert will be rocking an OEM front lip with the Leon splitter for added depth :twisted: And I'm on the hunt for a new front bumper and Pass wing to sort the horrible front end mess out! And I'm measuring the spot lights on the Pug up to see if they'll fit
http://www.freeadsonlineuk.com/_mm/_d/_ext/25537/big_Peugeot 206206cc Front Fog Lights 3501.jpg
-
Looks like my instrument panel is being removed again.
As for the dimmer if it does not bother you, join the wires on the back of the dimmer panel and that will short it out so the LED's wont blow.
Led's do have a short life on a rheostat as they are not designed for fluctuating currents, its the same as energy savers and dimmers at home
-
Some people might think me a little odd in doing what I've just done (my girlfriend in particular).
I've replaced my half leather rear seats with some cloth ones thanks to Famine. I'm not a fan of the half leather seats and they were looking a little tatty in my mind (they are up for sale if anyone is interested, PM me).
I also salvaged the number plate mount from Famine and half the front lip. Once again, my girlfriend thinks the number plate mount looks horrible but I think it looks better than having bits of tape showing. I'm going to match it to the colour of the bumper.
I was out this morning when a parcel came so can't get it until monday and I'm hoping it will be Ryans front lip. Once I get it I'll be sorting it out and spraying both halves and fitting them with the Leon splitter also.
-
Little update. I've got my splitter primed and test fitted with the Leon splitter.
These are the two halves I got from Famine and Ryan (cheers guys, you're awesome)
Prepped, primed and fitted (using zip ties :lol:)
Just needs some slight adjustment on the Leon splitter and paint.And here's my speedo so far, I need to adjust the positioning of some of the bulbs because there is a dull patch on the centre dials where the light isn't getting through.
-
splitter looks realy well could i pinch your idea please
-
@350ab0b39c=jay:
splitter looks realy well could i pinch your idea please
NO! It's mine! lol :lol:
Crack away mate, I've still got a lot more to do on it to make it how I want it. I'm thinking of getting both splitters bonded and smoothed together to make them one, looks like a trip to a body shop may be in order.
