A few vacuum problems, pictures inside
-
If you are not running EGR then you have your vacuum way wrong at the moment.
Just copy this pic:
You can remove all the Vacuum solenoids in this pic:
All three of them can go if your not running EGR.
All you need are the 2 VRIS solenoids, the PCV Solenoid and the FPR Solenoid. So only 4 should be on your car
-
I read on MX-3.com that my third thingie is the Purge Control, but also that my Mx3 have it built in the firewall.
Does this mean i dont need to plugin the one i have on the IM?
-
No as I said you can remove, just use the one on the firewall.
-
Hi again!
Thanks alot for your help, i will do what you said asap and then we're ready to fire it up :)
Can you help me aswell with the forth picture?
:love:
-
Make sure you put the brake booster pipe on, noticed it was off in your pics.
And blank off any open vacuum ports on the IM if there are any.
What ECU are you using?
-
Ah yes, im about to buy abit longer hose for the brakes.
I'm gonna use K8 ecu and je50 vaf until i get the probinatorchip.Sry again, but do you know what i can do with the 4:th picture? My dad thought it was for the water cooling system but we can't hook it up anywhere.
Thanks!
-
I can't tell where that pic ture is can you take one further out.
There are two heater matrix hoses it could be. (they attach to black plastic fittings on the firewall)
There are two fuel lines, one goes to the filter one to one of the rails I think.
Check those.
-
4th looks to me like the coolant to goto millenia auto gearbox. It's hard to tell on the photo, but my engine has a similar 2 port outlet. Mine is just blocked off.
-
Ah cool, guess we will try to plug it and see :)
-
Take a better pic first incase its not something you want to plug :wink:
