Headlight adjustment

Raines

hi all, ive just had to replace the headlight bulbs as the blak came off and now the beams are all over the place drivers beam too high and passenger too low.. oh and yes i have checked to see if there seated correctly too hahaha…
now how do i adjust the beam up and down as i have looked at the manual on disc i have and there no info, so its poo poo...
can someoe point me in the right direction and if poss a pic too...
thanks in advance

Neil..

Mikey

Have you got electric level adjusters on your lights?

Either way, the up and down adjustment is on the back of the lights, in the bottom outside of the back. So that would be bottom left for passenger side, bottom right for drivers.

It's and adjustment screw diagonally on the back of the light, you should be able to get a philips screw driver on it.

Left and right adjustment is on the top oof the light (bonnet open looking down at light unit) a whithe plastic hexagonal screw.

I had electric level adjusment on my old MX, the motors went nuts and poped the adjusters off the lense, beams were every where! Check the lenses inside unit are on tight.

Raines

@fbba3b9777=Mikey:

Have you got electric level adjusters on your lights?

Either way, the up and down adjustment is on the back of the lights, in the bottom outside of the back. So that would be bottom left for passenger side, bottom right for drivers.

It's and adjustment screw diagonally on the back of the light, you should be able to get a philips screw driver on it.

Left and right adjustment is on the top oof the light (bonnet open looking down at light unit) a whithe plastic hexagonal screw.

I had electric level adjusment on my old MX, the motors went nuts and poped the adjusters off the lense, beams were every where! Check the lenses inside unit are on tight.

Thanks for the info Mikey ill have a look later when the light dims for adjustment…do you happen to have a pic just in case mate....
Oh and no on the electric adjustment mate dont have i on mine...

Mike

Sorry for a bit of a hijack, but the inners on mine are loose, what can i do about them?

Raines

hello all just a quick update on the lights situation all sorted now seems the previous owner had done a botch and put the beam direction well out at some point, now i can see in the dark hahaha well with me glasses as well..
Neil…

Welly

Nice one Neil,

Raines

@7d3bf18925=Welly:

Nice one Neil,

Thanks mate, i must admit i did take it to a garage but it was where a mate works and he let me use the mot test equipment and reset the lights myself as a favour…

Neil..