MX-3's required for induction kit fitting - Devon
-
Hi guys
I'm working to bring out MX-3 CAI induction kits again, and need a V6 and a 1.6 to work on.
I am in Exeter, Devon. Would need car for around 30 mins.
Anyone interested? Free CAI to whoever when they are ready.
-
What do you want to do to it?
-
He takes off your stock intake, makes up pipes to collect air from a cold part of the engine bay (Cold Air Intake), or down the hole towards the foglight. Makes a template, gives you the kit for free, probably plus a cone filter.
Free part, probably some extra horses (though exhaust upgrade would magnify this), more aggressive induction sound… If I was in near I'd jump on it.
-
Roc
Based on Marco's recommendation I can bring my 1986 1.8 v6 down to Exeter no problem. Standard lump 103k miles.
-
Thanks.
Had a couple offers so far, which is great.
I'll be in touch shortly.
Going to see if anyone closer comes up first, in case I need a second fitting.
-
i got a 95 v6 im from dorchester
From: Dorchester, Dorset
To: Exeter, Devon
Distance: 55.1 miles (show in km)
Time: 1 hr 18 min
-
Ahh! It's competition time I see. :lol:
From: Swindon, Wiltshire
To: Exeter, Devon
Distance: about 100 miles
Time: 2 hrs.
Availabilty: Any time as I am retired. :D
-
@a11f44a3df:
i got a 95 v6 im from dorchester
From: Dorchester, Dorset
To: Exeter, Devon
Distance: 55.1 miles (show in km)
Time: 1 hr 18 min@a11f44a3df:
Ahh! It's competition time I see.
From: Swindon, Wiltshire
To: Exeter, Devon
Distance: about 100 miles
Time: 2 hrs.
Availabilty: Any time as I am retired.a'hah i see where this is going lol fight fight fight…
well i too would be willing to pop down and loan the old v6 to ya fella ..
retired also..Neil...
-
But, Neil, you know Cirencester is miles and miles further up the road. :lol:
-
@1529fa4299=Rod:
But, Neil, you know Cirencester is miles and miles further up the road. :lol:
i can do the run in 1 1/2 hrs..its all motor way..and its a day out too i can pop to a local beach for some fish and chips and an icecream for afters…yum yum...
tell ya what we could turn it into a local'ish mini meet / run..
-
@9b8da474f9=Rainmaker:
@9b8da474f9=Rod:
But, Neil, you know Cirencester is miles and miles further up the road. :lol:
i can do the run in 1 1/2 hrs..its all motor way…
Hope there's no speed traps along the way. :)
-
@9590a9adef=Rod:
@9590a9adef=Rainmaker:
@9590a9adef=Rod:
But, Neil, you know Cirencester is miles and miles further up the road. :lol:
i can do the run in 1 1/2 hrs..its all motor way…
Hope there's no speed traps along the way. :)
What speed traps..lol??? was down that way to collect my wheels and didnt see any…them radar jobbies just bounce off stealth wise on black mx3's hahaha..they only detect red ones....
-
@e704d83c38=Rainmaker:
What speed traps..lol??? was down that way to collect my wheels and didnt see any…them radar jobbies just bounce off stealth wise on black mx3's hahaha..they only detect red ones....
And there was me about to suggest your SatNav needed recalibrating.
Now where's my spray gun??
-
for your new kit are you removeing the fog light to get a cold air feed or geting it some where elce ?
or just around the fog light
-
@b14cacde82=james:
for your new kit are you removeing the fog light to get a cold air feed or geting it some where elce ?
or just around the fog lightNo idea yet, need cars to look at.
Nobody local has contacted me, will give it a few days, after that I'll give you further away guys a shout.
-
if someone is building a CAI that goes to the foglight hole I would be interested… I was thinking of fabbing one up for actual cold air
-
As I posted in the other thread, these are now ready, and fit very low in the engine bay. It would simple to add a pipe to the fog light area.
