Sam's Proper MX-3 - LT Turbo project *Parting out*
-
How much lower can your car go? Was it 3 turns you did on the coilies?
-
@c6f7dd4e5d=HammyGlos:
How much lower can your car go? Was it 3 turns you did on the coilies?
Ive probably got about another 30-40mm to play with lowering wise.
Do not want to bottom out my coilovers though,
and any more lower is going to become a bit impractical for a daily driver,
but would look nutty 8)Not sure Im bang into the broken suspension look though,
sure going to hammer the tyres in no time…Going to look into arch rolling or turning the spacers back a bit :D
-
I wish i could afford Coilies…. :cry:
I'd love to go way low!!! :lol:
btw. bases are in the post bud!!
-
One day I will fully deck it, for the track :D
Thanks dude, gimme something else to tinker on :oops:
Right result on the rear set of spacers, its just in
at the top 8)
Taken the front ones off for now till I decide what to
do about them
-
7J rim (ET35) +25mm spacer is the same as a 9J rim (ET35), not an 8J. ;)
Stock V6 rims are 6JJ x 15 ET45 as far as I can tell from the intershizzle.
-
Yes. Im using 7 inch wide rim + 25mm spacer wich is imitating an 8inch rim.
-
car looks sik ! fmic behind that grill ! also projector lights like SstennizZ
what u fink ?
-
Thanks Jay,
Mmmm projectors, still not 100 percent on them,
wouldnt mind the brighter light, but
think the stock headlights look better on a red '3,
but if I ever get the car painted white then
black ones fo sure 8)
-
Found somewhere that will flare my arches
from 45 quid each :D
http://www.iridiumengineering.co.uk/arch.htm
-
Got my new mirrors today :D
wrong base plates, but you get the idea :wink:
-
@7d63d243f4=youdirtyfox:
Got my new mirrors today :D
wrong base plates, but you get the idea :wink:
Interested to see what these look like on the car, I still want some Ganador mirrors :( but don't do them for the MX3 :cry: (would be a big job to make them fit as well and costing over £200, I wouldn't like to try).
-
@0417bcfad5=youdirtyfox:
Found somewhere that will flare my arches
from 45 quid each :D
http://www.iridiumengineering.co.uk/arch.htmGo ghetto arch rolling with a book and a hammer :wink:
-
I have various assortments of hammers yes :lol:
-
Another little project I'll be working on
for this car, is these escort recaros my mate
donated to me after selling his saxo they were in :
Going to need reupholstery and a new bolster,
but apart from that they are pretty mint not to
mention very comfatable and great for holding
you around corners :D
Luckily the missus has just bought a sewing machine
thats capable of doing leather, but I quite fancy Alcantara :D
-
@54e3fad4ff=youdirtyfox:
Yes. Im using 7 inch wide rim + 25mm spacer wich is imitating an 8inch rim.
**Just so you know, an 8" wheel would be 0.5" further out from the hub and 0.5" further in to the well than a 7" wheel of the same offset. A 25mm spacer pushes the whole wheel out by 1", making it 1" further out from the hub, imitating a 9" wheel of the same offset.
7" + 25mm spacer = 9" wheel equivalent, of same offset.**
-
Yep im with you now, moving the wheel centre out using a spacer
as opposed to an 8 inch rim.
-
Kaboom! Just scored what looks
to be a mint hatch garnish of ebay 8)
-
@e6d50ec88b=youdirtyfox:
Kaboom! Just scored what looks
to be a mint hatch garnish of ebay 8)
Was this off a greeny blue MX3?
-
came off Item number: 160554015313
whys that mate?
-
@49a2b0c684=youdirtyfox:
came off Item number: 160554015313
whys that mate?
Yup, just contacted the guy about it last night, got a reply today saying it had gone this week. You pesky peskier.