Presso.
-
Heres my MX-3, a presso, 1.5 auto, clocked 70,000 miles earlier today.
Going mostly cosmetic till i can afford a new engine, reading up on here, these chassis are quite good for a swap!
I'll get more pics after a clean!
Plans
1. Put a set of either Ronal Turbos or SSR Mesh wheels on.
2. Yellow Laminex on front indicators/sidelights w/ Yellow side bulbs.
3. fix headlights, smoke them, some quality yellow bulbs.
4. Jap plate and holder on the front
5. areo wiper blades, other little touches here and there to make it a good tourer.Any opinions welcome!
-
nice motor you got there
the only things i would say is spot and the side spats off a v6 and thay are quite cheap.
-
Get some standard 15" 5 spokes, and drop it on its arse..will look amazing :)
-
@7fd82e393d=Welly:
Get some standard 15" 5 spokes, and drop it on its arse..will look amazing :)
Haha, saving for those XYZ coilovers! Might take a grinder to the springs meantime. :P
Standard 5 spokes? thought the stock mx3's were:
-
They had those wheels mostly on the RS and earlt GS but on the post 93 GS they often had 5 spoke.
-
Since the above picture.
Yellow laminex on indicators.
MX-3 SE wheels!
vynal numberplate on front, better sized jap plate on rear, rear plate at an angle.
smoked headlights. (almost murdered look)
7k Miles :DYellow fog lights on route.
Pics to come soon! Just having trouble uploading pics due to my interweb connection :(
tempted to do something mechanical, to do with the suspension, thats sharp and spins really fast :roll:
EDIT.
Just a quick question, Those 5 spoke mx3 wheels…. Are they 7 inch or 6 inch wide?
-
@89f0a8d07f=Mike:
Just a quick question, Those 5 spoke mx3 wheels…. Are they 7 inch or 6 inch wide?
the 5 spokes are 6 inches wide…
I see you have the JDM front lip so I'm guessing you have JDM power folding mirrors as a stock option as well as the 7.5k redline? :D
-
@a8092eea47=Mooneggs:
@a8092eea47=Mike:
Just a quick question, Those 5 spoke mx3 wheels…. Are they 7 inch or 6 inch wide?
the 5 spokes are 6 inches wide…
I see you have the JDM front lip so I'm guessing you have JDM power folding mirrors as a stock option as well as the 7.5k redline? :D
thanks for that, i'll stick to the current ones, hoping they might of been 7" :(
Of course i do!
Air con, rear "eunos" blue lit badge, and JDM rear bumper. 8)
-
@4ccc9f1bc7=Mike:
Air con, rear "eunos" blue lit badge, and JDM rear bumper. 8)
sigh… I've been looking for the rear eunos blue lit badge forever... any chance you can post some close up pics of it? maybe with it lit too? just so I can drool over it :D
-
@35882db251=Mooneggs:
@35882db251=Mike:
Air con, rear "eunos" blue lit badge, and JDM rear bumper. 8)
sigh… I've been looking for the rear eunos blue lit badge forever... any chance you can post some close up pics of it? maybe with it lit too? just so I can drool over it :D
Same, tho it should be easy to make one with a simple wire and LED job.
-
yes but I only use OEM parts :x
-
Yes yes i like the euro inspired yellow lighting idea and Ronals!
Im going down a similar route with mine. I have some Speedline Turbines waiting to go on and some yellow film ordered for most of the lights
Mines white too so it should look hot!
-
Not sure where my other for sale thread went, and also if theres a part on the forum for UK for sale stuff!
anyhow, my pressos up for offers now, but i need a motorcycle in my life, so a straight swap would be ideal.
anything over 500cc.
if you need to contact me, please call/text o7989342 666
Thanks
Mike
-
PM me how much your looking for the Eunos mate :)
-
@a01ce84ae5=Mike:
Not sure where my other for sale thread went, and also if theres a part on the forum for UK for sale stuff!
anyhow, my pressos up for offers now, but i need a motorcycle in my life, so a straight swap would be ideal.
anything over 500cc.
if you need to contact me, please call/text o7989342 666
Thanks
Mike
http://www.uk-mx3.com//forum/viewtopic.php?t=2611&highlight=
-
Current state: Winter Hanging Mode.
Sorry for photo dump, various pics over the last few months finally uploaded!
Car will be up for sale soon for £750, but would much prefer a swap with a bike, something over 500cc, not fussed what it is, good conditon and taxed and tested, but will consider it if its less than ideal.
high price is due to the parts on the car.
Drivers and passenger side wind deflectors, (drivers slightly damaged.)
Rear lit up eunos badge (OEM)
electric fold in mirrors. (OEM)
Full eunos car matts (OEM)
Air Conditioning
Rear JDM bumper.Basicly, a Enuos Presso 1.5 Auto with a fair few optional extras.
Engines spot on, needing a alternator belt soon but want for nothing else.
will be sold with a fresh oil change and maybe new plugs, if i'm nice.
Nearing 80,000 miles, i've done 10,000 in the last 6 months, and its been absolutly spot on, and giving fairly good mpg considering its an auto.
Sale thread will be put up when forums been sorted.
PM or call me on o7989342 666.
Thanks!
-
Looks quite cool with the BBS alloys on! Are they off an E30 Beemer?
-
Yep they were!
unfortunately got 1/2 way up the road and they started knocking :(
was a big old shame!
-
-
Just wondering if anyones found this.
i've tried some mx5 14" wheels and i absolutly love them! they've transformed the car and it handles a tonne better now.
obviously had the wheels in the pics on before with avon tyres.
now with mx5 wheels with mix match budgets and it drives, rides, and handles loads better!
anyone else found this?