Trevor (Ice Man)'s V6
-
big plans mate :) i like the style. all in no holds barred. there is still so much I would like to do to mine but recently lost my job so its all on hold for a min and just being used as a daily (til the cambelt snaps) keep us informed of the updates mate. its nice to read a new thread on here with someone thats serious about the mx3 :D
-
Loving it!
Got the week off work…. however I havent done much to the MX3 :evil:
managed to spend about 45 minutes on the car on Sunday... been a sungle mum for a couple of days while the wife has been faffing about with her mum and dad etc (need to go back to work for a break)
I putmy time to good use :) bought a polishing mop on Saturday and dug out the meguires polish that I should have used onmy last car :oops: (pink)
After a small ammount of elbow grease and a lot of electricity the bonnet came up OK (needs more work though)
then I got on to the rear bumper, which is 2/3 flat and 1/3 shiney. need to put about an hour into the back bumper to prevent embarrassent at Jap fest!! :oops: :oops:
The flat bit on the rear bumper now has a semi-gloss / shine. I think it will come up OK with a good polish and some Meguiars Carnuba wax…
Will getshiney pics up n a couple of days... Hopefully I will have changed the rear pads and rust treated / stonechip guarded the underside by the weekend - fngers crossed...
-
Looks real tidy keep up the good work :bigok:
-
Looking good so far. Please get rid of those crummy England stickers!
-
Nice work fella :D do red is such a pain to stay looking good
Keep up the good work
-
Thanks Guys :D
The bonnet is still shiney, but the rest of the car is not looking so good.
Today I took off the rear mudflaps… they were rubbish. luckily the bumper / paint underneath is OK. Then I jacked up the car and took off the back wheels. Started to cut out the rust from the back arches and made a couple of holes in some rusty parts :shock: in the O/S rear wheelhouse / sill end. one of them is next to the rear washer bottle. Might have to do some welding tonight...
Next to do - take off the rear spats, check out the previous welding, rub everything down, rust treat with Jenolite and zinc prime… then not forgetting replacing the rear brake pads.... busy times!
-
Bloomin hate rust as much as the next person…
Went to see my mate Pete and his mig welder today, here are the results...
removed the washer bottle and found this large dead stick insect??? Random.
then I cut out the rot…
prepared the paint… notice I bought a new powerflow back box, didnt get round to fitting it today though :-(
then we welded a plate in
same at the front of the wheelarch…
couple of months MOT left… should be OK for it :bigok:
-
Started to do some more work today, at long last.
I now have a running donor car to play with…
Planning to swap the exhaust system, battery, back wheels / tyres, stainless sill protectors. Already swapped the MX-3 mat set.
Decided to fix my bolster. the seats are the same cloth trim so I decided to use the passenger seat from the donor car to fix my drivers seat…
Seat stripped...
Foam swap in progress…
Finished job, 1/2 hour simple job to do :-) seat looks like new.!
More to follow soon.
Trev.
-
I was thinking about doing this same thing to my OE seats, nice work! the foam looks a tad bit different is that the difference from drivers to passengers?
-
@ea855bbbb9=josh95mx:
I was thinking about doing this same thing to my OE seats, nice work! the foam looks a tad bit different is that the difference from drivers to passengers?
The foam is identical from passenger to drivers side… its just an optical illusion. (my poor photography skills)
Its an easy job to do. recline the seat forward and at the base there are about 5 copper plated steel clips wound around steel wire sewn into the ends of the seat covers at the bottom of the cloth. these can be uncoiled with two pairs of needle nose pliers (or cut off with snips) you can then slip the seat cover up about half way and then then there are 3 more steel wire coils to remove in the front face of the foam. with the head rest off, you can carefully slip the seat cover off the plastic head rest holders. the foam just pops off, then, as in every haynes manual, refitting is the reverse of removal.
well worth the effort 8)