What are your plans for your 3 for this year?
-
Nitrous
-
@203f298d17=mx3gulf:
Nitrous
i will look forward to this as i wanna do the same.
-
@1629db1568=barrywhite21:
Plans for the year are:
Smoked lights all round
Tint rear window (Group buy)
Paint Splitter to match bumperLSD
Engine ManagementSmoking the lights all round can get you a fine as it breaks MOT rules
I found some stuff called FLYEYE which is sticky black vinyl full of holes like a net so the lights still look black in the day but the light shines through at night, I uprated all lights with LED's including some brake light bulbs I found online in japan and uprated the headlights with ultra white xenons and blacked out the headlights too yet it still passes MOT restrictions
1 pack for 14.99 did every light on the car including headlights and looks the nuts !!!
You dont get runs and you dont get grief from the old bill
-
Plans for my MX's
DAYTIME ONE
Buy whole top set for engine (inlets + rockers) and get polished or chromed
Change Alloys
Induction kit + resistor airflow sensor
ECU remapPROJECT CAR
dont know whether to concourse this yet as its a rare limited edition EQUIPE model I rescued and is not that bad on condition but it has a couple of dents and scratches that will be hard to remove without full respray and the paint is black with green metallic flake hopefully the same as the 323 and the drivers seat needs recovering as it is worn + torn
-
To fit :
JDM front splitters.
Red pinstripes on the alloys.
Import size no. plates front and back.
replace fog lights with custom spun intakes.To buy:
Coilovers
Mazdaspeed side skirts
VJ Turbo to fit my 323 fanimold!
FMIC and boost pipes
management
-
lol fanimold :P
-
@0b3d67ce72=jay1987:
lol fanimold :P
lol i missed that nice spotting :lol: :lol:
-
@9b41e3f25c=djmarcopolo:
@9b41e3f25c=barrywhite21:
Plans for the year are:
Smoked lights all round
Tint rear window (Group buy)
Paint Splitter to match bumperLSD
Engine ManagementSmoking the lights all round can get you a fine as it breaks MOT rules
I found some stuff called FLYEYE which is sticky black vinyl full of holes like a net so the lights still look black in the day but the light shines through at night, I uprated all lights with LED's including some brake light bulbs I found online in japan and uprated the headlights with ultra white xenons and blacked out the headlights too yet it still passes MOT restrictions
1 pack for 14.99 did every light on the car including headlights and looks the nuts !!!
You dont get runs and you dont get grief from the old billDepends if you get legally smoked lights.
-
@a717db3cbd=nightstalker:
@a717db3cbd=djmarcopolo:
@a717db3cbd=barrywhite21:
Plans for the year are:
Smoked lights all round
Tint rear window (Group buy)
Paint Splitter to match bumperLSD
Engine ManagementSmoking the lights all round can get you a fine as it breaks MOT rules
I found some stuff called FLYEYE which is sticky black vinyl full of holes like a net so the lights still look black in the day but the light shines through at night, I uprated all lights with LED's including some brake light bulbs I found online in japan and uprated the headlights with ultra white xenons and blacked out the headlights too yet it still passes MOT restrictions
1 pack for 14.99 did every light on the car including headlights and looks the nuts !!!
You dont get runs and you dont get grief from the old billDepends if you get legally smoked lights.
I have legal smoked bumper indicators, rear lights and side repeaters to fit. I also have a nice guide from nightstalker about doing the headlights on the inside and have some brighter bulbs for them. then i just need to look at the fogs.
Also i understand people are having trouble finding smoked side repeaters…. I cant find them anywhere either, however my mrs has managed to buy me two pairs now! I will find out where from and post up if anyone is interested.
-
I'm getting these when I get paid (beat you to it Barry :P )
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=150398665722&ssPageName=STRK:MEWAX:IT
-
Plans….
For the 1.6 Automatic:
- Just got to put on a new rear wiper+motor assembly then she will be going up for sale.
Silver 1.8 V6
- Currently trying to swap this for a car for my girlfriend (just passed her test) any small engined car will do see this thread: http://www.uk-mx3.com/forum/viewtopic.php?t=2242
Black 1.8 V6 Special Edition
Sadly my first MX-3 a black 94 Special Edition was just given to my brother for xmas as he really needed a car and I had way too many.For the KLZE:
- New water pump
- overhaul front drivers caliper or fit new one at its a tiny bit sticky
- Then its time to supercharge it or sell it and buy an RX7
-
For the daily driver:
CF hood re-clear coated
new valve cover gaskets
outlaw thermo spacers
b pillar bar
whiteline rear sway bar
rear full poly bushings install (70 durometer)
new struts (probably kyb gr2)
wire up euro switches for front/rear foglights, leveling function and big red hazard switch
install under the steering wheel tray with drawer
new fuel pump (walbro), injector rebuild, racing fuel filter, Aeromotive AFPRFor the race car:
3 pod display in middle a/c vents, 3 pillar gauge pod by window
new head gasket, possible engine rebuild if pistons are shot
adjustable cam pulleys install
LSD install
rear full poly bushings install (80 durometer)
b pillar bar
k sport coilovers with remote resevoirs
CF hatch install with lexan
CF cowl, CF mirrors, CF hood, CF gastank lid, CF rear wing all re-clear coated
CF radiator cover installI think that's all…. lol 8) The cool thing is I already have 90% of all of these parts... just gotta find the time to do the work! If you haven't seen my worklogs in a while I've got most of the aesthetics sorted on the cars... including full OEM JDM kit on the DD... and another euro bumper with foglights on the RC...
-
@1a56535b9a=jay1987:
lol fanimold :P
guess she didn't clean up after her self…... :D :D